Description
Hemisphere Vector™ VR1000 GNSS Receiver 980-0097-20/30
The Vector™ VR1000 is Hemisphere GNSS’ premiere multi-GNSS, multi-frequency position and heading receiver designed specifically for the machine control market. Providing precise heading, Athena RTK positioning, and full Atlas capability, its rugged design is compliant to IP69K, MIL-STD-810G, and IEC 60068-2 standards.
The VR1000 supports antenna separations up to 10 meters, offering heading accuracy to 0.01 degrees RMS in addition to RTK position accuracy and full support for Hemisphere GNSS’ Atlas Global Correction Service. [20Hz, aRTK, RTK, mFREQ, mGNSS, Heading, H10 6-MO]
Note:
- IronOne or IronTwo must be ordered separately to complete the system
Key Features
- Athena™ RTK Engine
- Extremely accurate heading with baselines up to 10m
- Multi-frequency GPS/GLONASS/BeiDou/Galileo/QZSS/IRNSS
- Atlas® Global Correction Service
- Integrated Ethernet, CAN, internal 400MHz radio, Serial, Bluetooth, and Wi-Fi
- Powerful WebUI accessed via Wi-Fi plus 12 multicolor LEDs
- Integrated IMU delivers fast start-up times and maintains heading during temporary GNSS outage
- Fully rugged IP69K, and MIL-STD-810G compliant solution for the harshest environments
Three (3) Models Available
- GradeMetrix VR100 Excavator Kit, GMS-1 980-0097-10 (Small)
- GradeMetrix VR100 Excavator Kit, GMS-1 980-0097-20 (Medium)
- GradeMetrix VR100 Excavator Kit, GMS-1 980-0097-30 (Large)
Components
- 752-0030-10 1x HGNSS VR1000 Receiver
- 752-0041-10 2x A46 ANTENNA, HGNSS
- 051-0408-10 1x HGNSS IronOne Bulkhead Cable
- 051-0415-10 1x Cable, RG 213, N-Type, Male, with Caps, 25ft
- 051-0416-10 1x Cable, RG 213, N-Type, Male, with Caps, 20ft
- 051-0419-10 1x CBL,VR1000 Excav Rcvr I/O,23to12pin,0.5m
- 051-0420-10 1x CBL,VR1000 Excav Chassis,12to2X6Pin,5m
- 150-0018-000 1x ANT,450-470MHZ,3DB-MEG,3.4″,BLACK
- 150-0053-10 1x IronX BT_Wifi Antenna
- 150-0054-10 1x IronX Cellular Antenna
- 150-0056-10 1x Antenna, BT_WiFi, ANT-GXH918-TNC_M
- 163-3019-2 1x MAGNET BASE, 3.25″ DIA, CHROME, UHF ANT, 12′ CABLE, TNC
- 710-0148-10 1x IronX Flush Mount Kit
- 710-0149-10 1x IronX U-Mount Kit
- 710-0161-10 1x KIT, MOUNTING MAGNETS, VR1000
- 710-0186-XX 1x KIT,CAN ASM SENSOR,CBL,EXCAVATOR (SMALL OR MED OR LG)
- 710-0214-10 1x KIT, SENSORS, GMS-1, EXCAVATOR
- 750-0245-10 1x CAN TERMINATION RESISTOR, M12(F)
